4D6x family

From Mitsipedia
(Redirected from 4D65)
Jump to navigationJump to search
4D56 Turbo installed in a 1999 Mitsubishi Lancer Combi (Europe)

The 4D6x family is a series of overhead cam 4 cylinder direct injection diesel engines produced by Mitsubishi and used in it's range of small cars. Both versions use belt driven single overhead camshafts and balance shaft.

4D65

The 4D65 displaces 1.8 litres (1795cc) and uses a 80.6mm x 88mm bore and stroke with a 22.1:1 compression ratio. It uses an ordinary distrubutor type fuel pump. It is available in both normally aspirated and turbo charged forms.

In normally aspirated form, it produces 45 kW at 4500 rpm and 111Nm at 3000 rpm. With turbo charger it produces 56 kW at 4500 rpm and 149 Nm at 2500 rpm.

Applications

  • Mitsubishi Lancer/Mirage CC (1991-1996)

4D68

The 4D68 displaces 2 litres (1998cc) and uses a 82.7mm x 93mm bore and stroke with a 22.4:1 compression ratio. It uses an ordinary distributor type fuel pump. It is available in both normally aspirated and turbo charged forms with and without intercooler.

In naturally aspirated form, it produces 50 kW at 4500 rpm and 123 Nm at 3000 rpm. In turbo charged form it produces 65 kW at 4500 rpm and 176 Nm at 2500 rpm.

Applications

The 4D68 wasn't used in Australian domestic models, but was used in:

  • Mitsubishi Lancer/Mirage CC and CE (1991-2000)
  • Mitsubishi RVR (1991-2000)
  • Proton Wira
MITSUBISHI DIESEL ENGINES
4 cylinder
Astron 4D55 4D56
4D3x 4D30 4D31 4D33 4D35 4D36
4DR 4DR1 4DR5 4DR6
4D6x 4D65 4D68
4M4x 4M40 4M41