Difference between revisions of "F1CJA"
Cartman02au (talk | contribs) |
Cartman02au (talk | contribs) |
||
| Line 16: | Line 16: | ||
|Hypoid Gear Oil SAE80 | |Hypoid Gear Oil SAE80 | ||
|- | |- | ||
| − | |''' | + | |'''Transfer Lubricant Capacity''' |
|0.47 Litres | |0.47 Litres | ||
|- | |- | ||
| Line 45: | Line 45: | ||
{{Clear}} | {{Clear}} | ||
==Technical Articles== | ==Technical Articles== | ||
| − | *[[Jatco | + | *[[Jatco JF011E Stepper Motor Testing]] |
[[Category: CVT Transaxles]] | [[Category: CVT Transaxles]] | ||
[[Category: Seventh Generation Lancer]] | [[Category: Seventh Generation Lancer]] | ||
[[Category: Second Generation Outlander]] | [[Category: Second Generation Outlander]] | ||
Revision as of 00:33, 13 September 2020
The F1CJA/W1CJA transaxles are CVT units featuring INVECS III technology and were used in the Seventh Generation Lancer and Second Generation Outlander. They are the same basic transmission with the W1CJA having a transfer case added for all-wheel drive applications. Some vehicles have a tiptronic gear selector, where the transmissions simulates having six distinct gear ratios.
The transaxles are manufactured by Jatco who identifies them as the JF011 or CVT2 and are designed for medium torque applications (up to 250Nm). They have been used in a variety of applications in vehicles from Suzuki, Nissan, Jeep and Dodge.
The transaxles employ an electronically controlled torque converter (to assist in take off), forward and reverse clutches, reverse planetary gear set, two pulleys/variators and a steel reinforced push belt. Ratios are controlled using a stepper motor, ratio control valve, secondary valve and secondary pressure solenoid which change the effective diameter of the pulleys thus changing the ratio.
Technical data
| Lubricant | Mitsubishi CVTF-J1 |
| Capacity | 7.1 Litres |
| Transfer Case Lubricant (W1CJA) | Hypoid Gear Oil SAE80 |
| Transfer Lubricant Capacity | 0.47 Litres |
| Torque Convertor Stall Ratio (4B11 engine) | 1.99 |
| Torque Convertor Stall Ratio (4B12 engine) | 1.83 |
| Torque Convertor Stall Speed | 2,400 - 2,900 rpm (all applications) |
| Torque Converter Clutch Control | Electronic, locks up around 19 Km and remains locked until vehicle slows down |
| Ratio Range | 2.349 to 0.394 |
| Reverse Ratio | 1.750 |
| Final Drive | 6.466 |
| Transfer Gear Ratio (W1CJA) | 0.425 |
