Difference between revisions of "KM164"
From Mitsipedia
Jump to navigationJump to searchm (Protected "KM164" [edit=sysop:move=sysop]) |
Cartman02au (talk | contribs) |
||
| Line 43: | Line 43: | ||
|4.109 | |4.109 | ||
|} | |} | ||
| − | [[Category: | + | [[Category: First Generation Magna]] |
[[Category: Manual Transaxles]] | [[Category: Manual Transaxles]] | ||
Latest revision as of 01:24, 11 January 2010
The KM164 is an 5 speed manual transaxle which was fitted to TM model Magnas.
The KM164 is interesting as it uses a vacuum servo to select what is seen by the driver as 5th gear, which is achieved by changing a gear on the input shaft. When 5th gear is activated - the transmission remains in 4th gear and the high ratio on the input shaft is selected. Essentially the transmission in the transaxle is a high/low ratio unit, however this is only ever used when the vehicle is put in and out of 5th gear unlike some other vehicles.
The KM164 was superseeded by the KM210 in TN and TP models.
Technical data
| Lubricant | 75W/85W Hypoid Gear Oil | |
| Capacity | 2.3 Litres | |
| Clutch Plate Diameter | 215 mm | |
| Clutch Operation | Hydraulic | |
| GEAR RATIOS | ||
| Final Drive | 3.187 | |
| 1st | 4.070 | |
| 2nd | 2.244 | |
| 3rd | 1.467 | |
| 4th | 1.105 | |
| 5th | 0.855 | |
| Reverse | 4.109 |
