Difference between revisions of "F5M42"
From Mitsipedia
Jump to navigationJump to searchm (Protected "F5M42" [edit=sysop:move=sysop]) |
Cartman02au (talk | contribs) |
||
| Line 43: | Line 43: | ||
|3.363 | |3.363 | ||
|} | |} | ||
| − | [[Category: Third Generation]] | + | [[Category: Third Generation Magna/Verada]] |
[[Category: Manual Transaxles]] | [[Category: Manual Transaxles]] | ||
Latest revision as of 11:03, 10 January 2010
The F5M42 is a 5 speed manual transaxle used in the TE and TF Magna with the 2.4L 4 cylinder engine.
The F5M42 is a much simpler design to the transaxles used in earlier Magnas. It uses a two-shaft design (whereas the older transaxles used three) and doesn't need to reverse the torque before output. On earlier Magna/Veradas the torque had to be reversed because the engine rotated in the opposite direction to the wheels.
Instead of using a conventional flywheel the F5M42 uses a three piece flywheel and flexible plate assembly to reduce drivetrain vibration.
Technical data
| Lubricant | 75W/85W or 75W/90W Hypoid Gear Oil | |
| Capacity | 2.1 Litres | |
| Clutch Plate Diameter | 215 mm | |
| Clutch Operation | Hydraulic | |
| GEAR RATIOS | ||
| Final Drive | 3.722 | |
| 1st | 3.583 | |
| 2nd | 1.947 | |
| 3rd | 1.379 | |
| 4th | 1.030 | |
| 5th | 0.820 | |
| Reverse | 3.363 |
