Difference between revisions of "F5M51"
From Mitsipedia
Jump to navigationJump to searchCartman02au (talk | contribs) |
Cartman02au (talk | contribs) |
||
| Line 13: | Line 13: | ||
|- | |- | ||
|'''Clutch Plate Diameter''' | |'''Clutch Plate Diameter''' | ||
| − | | | + | |240mm (3.5 and 3.8 Litre V6), 225mm (3.0 Litre V6) |
|- | |- | ||
|'''Clutch Operation''' | |'''Clutch Operation''' | ||
Revision as of 01:20, 26 December 2009
The F5M51 is a 5 speed manual transaxle used in the TE through TW Magna and the DB 380 with V6 engines and front-wheel drive.
The F5M51 is a much simpler design to the transaxles used in earlier Magnas. It uses a two-shaft design (whereas the older transaxles used three) and doesn't need to reverse the torque before output. On earlier Magna/Veradas the torque had to be reversed because the engine rotated in the opposite direction to the wheels.
Instead of using a conventional flywheel the F5M51 uses a three piece flywheel and flexible plate assembly to reduce drivetrain vibration.
Technical data
| Lubricant | 75W/85W Hypoid Gear Oil | |
| Capacity | 2.8 Litres | |
| Clutch Plate Diameter | 240mm (3.5 and 3.8 Litre V6), 225mm (3.0 Litre V6) | |
| Clutch Operation | Hydraulic | |
| GEAR RATIOS - MAGNA | ||
| Final Drive | 3.722 | |
| 1st | 3.583 | |
| 2nd | 2.105 | |
| 3rd | 1.407 | |
| 4th | 1.031 | |
| 5th | 0.761 | |
| Reverse | 3.416 | |
| GEAR RATIOS - 380 | ||
| Final Drive | 4.111 | |
| 1st | 3.333 | |
| 2nd | 2.105 | |
| 3rd | 1.407 | |
| 4th | 1.031 | |
| 5th | 0.804 | |
| Reverse | 3.416 |
